Rear Camera Payment Terminal Board with Wide Input Voltage, WF-SPT-05, AndroidSBC, Genoa

TL;DR: Rear Camera Payment Terminal Board with Wide Input Voltage

AndroidSBC head-to-head comparison of the smart payment terminal platform against prior generation boards serving Genoa, Italy. The WF-SPT-05 smart payment terminal Android motherboard covers the dual-screen smart payment terminal build for chain checkout and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 4-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Genoa and Italy importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC builds smart payment terminal Android motherboards for the unattended and attended ends of the same market. A Genoa buyer can take a countertop configuration for a shop counter and an outdoor configuration for a charging pillar from one supplier, on one Android baseline, with one SDK. Firmware is treated as a managed asset on this family. Italy estates receive staged OTA groups with rollback, signed images and a published maintenance window, so a Genoa operations team can schedule an update rather than react to one.

WF-SPT-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Italy importers sourcing the WF-SPT family, the WF-SPT-05-A variant is the typical configuration for the hypermarket and supermarket chain checkout lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Italy Buyers

Unattended formats change the failure model completely. A counter in Genoa has a human to reboot a terminal; a vending machine, a charging pillar or a parking machine does not, so the watchdog, the scheduled power cycle and the offline transaction buffer stop being optional.

Spare parts are the sixth problem. Aan Italy estate needs a repair path that does not depend on a single production batch, which is why AndroidSBC holds the bill of materials for the life of the configuration rather than re-spinning the board on every order. What Genoa integrators get is a board that repeats: 142600 units now, 142600 more next quarter, the same connector map, the same printer pinout, the same Android baseline, all moving on the Genoa - Shanghai lane into Italy.

Competitive Comparison: WF-SPT-05 vs Competing Smart Payment Terminal Motherboards

AndroidSBC publishes this comparison because Genoa integrators ask for it: what changes when a payment terminal board is built by a source factory that holds its bill of materials, against one that is re-spun on every order.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Genoa buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Italy integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Genoa is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

AndroidSBC reads the Italy market as a documentation market: growth is real, but the programmes go to the supplier whose file clears the acquiring partner first, which is why the dual-screen smart payment terminal build for chain checkout ships with its compliance set rather than after it.

• Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The trend that matters for Italy is estate size. As terminals multiply per site, remote management stops being a feature and becomes the purchasing criterion, which is where the Genoa decision is actually made.

Partner Success Story: Sundarbans Micro Merchant (micro merchant programme operator)

When Sundarbans Micro Merchant reviewed the South Asian micro retail market, the shortlist came down to whether a supplier would hold a configuration for the length of the agreement. Sundarbans Micro Merchant deployed 142600 WF-SPT boards across 1,100 micro merchant counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Sundarbans Micro Merchant branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

Sundarbans Micro Merchant Programme Manager for South Asian Micro Retail: "Sundarbans Micro Merchant runs the value configuration because the unit price decides the programme, and 142600 boards are now taking payments at Genoa market stalls."

Field Report: checkout lane refresh at a national grocery group

NANSHAN, September 30, 2026 - Chu Lin, AndroidSBC field desk. The WF-SPT-05 configuration was built for the dual-screen smart payment terminal build for chain checkout use case, and the Italy team ran the acceptance test with the same printer mechanism and reader antenna the integrator will install. The WF-SPT-05 payment terminal board order for Genoa, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-SPT-05 dual-screen smart payment terminal build for chain checkout production lot includes the WF-SPT-05-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Chu Lin, AndroidSBC field desk, NANSHAN. Italian buyers run high receipt volumes at small footprints, so the 58mm mechanism is qualified for continuous duty before the order is placed.

WF-SPT-05 Application Scenarios

The WF-SPT-05 dual-screen smart payment terminal build for chain checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-05-A configuration is the typical build for the hypermarket and supermarket chain checkout lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-10 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Genoa Buyers

For Genoa partners the choice is between stocking the board, integrating the board or branding the board, and each track carries a different level of engineering support.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks ship from the same source factory with the same compliance file, which is why Genoa partners can move between them as aan Italy programme grows.

Frequently Asked Questions

Does the smart payment terminal board family support a dual-screen payment terminal build for chain checkout?

Answer: Yes. The dual-screen payment terminal build for chain checkout ships as a standard configuration, qualified on the Longgang bench with the printer mechanism, the reader antenna and the scan engine that the Genoa integrator will install.

Which configurations are available in the WF-SPT family for Italy buyers?

Answer: Twelve configurations span Rockchip RK3576 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.

What payment scheme certification support does AndroidSBC provide for Italy?

Answer: The compliance file for Italy covers CE marking with AGCOM radio interface notification testing and AGCOM conformity, issued against the exact configuration that ships to Genoa rather than a generic family file.

What is the minimum order quantity and the sample lead time for Italy?

Answer: The minimum for a customised build is higher than for a stock configuration, but a Genoa buyer can start with a sample lot, qualify it on the bench, and then move to a production slot without re-qualification.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering team supports driver development, API integration, locale packs and application pre-install, and the resulting image is signed and staged into OTA groups for Genoa.

How are firmware updates delivered to aan Italy device estate after deployment?

Answer: Firmware is delivered as signed images through staged OTA groups with rollback, so aan Italy estate can be updated in waves rather than all at once, with a published maintenance window.

What shipping terms does AndroidSBC support for Italy orders?

Answer: AndroidSBC supports EXW, FOB, CIF and DAP, quotes Port of Genoa as the default port for Italy, and prepares the customs file before the container closes for Genoa.

Contact AndroidSBC: Start Your WF-SPT-05 Sourcing Conversation

Every Genoa programme starts the same way at AndroidSBC: the format, the peripherals, the certification calendar, then a quotation that holds the configuration for the term.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM, ODM and private-label tracks are open for Italy. AndroidSBC supplies the board, the firmware, the documentation and the qualification support, and Genoa partners own the channel.