EV Charging Station Directory, WF-G3601, AndroidSBC, Genoa

TL;DR: EV Charging Station Directory

AndroidSBC field desk: guide kiosk rollout map updated across retail, transport, healthcare and hospitality venues serving Genoa, Italy. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Genoa and Italy importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group and the source factory behind the WF-G smart guide kiosk Android motherboard family. The Longgang plant runs SMT, in-circuit test, functional test and a burn-in station under one roof, with a sustained output of roughly 5000 boards a week on this family and buffer stock held on the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 tiers. For Genoa integrators that matters at two points in a guide kiosk project: the pilot build, where a 1-3 day sample lead keeps a mall opening date honest, and the volume ramp, where a fixed BOM per production lot keeps Italy certification files valid across every floor and every site. For Italy importers the working rhythm in Genoa is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Italy Buyers

The ninth obstacle is fleet software management. A Genoa rollout can reach hundreds of screens across a mall group fast, and without staged update control and rollback, one bad content build takes the whole Italy estate down on the same morning.

The content stack is open by design. AndroidSBC documents the cloud content management client, the kiosk-mode lockdown layer and the directory and wayfinding interface on the WF-G family, and provides Italy integrators with a versioned SDK so the Genoa deployment can be extended without forking the image. AndroidSBC has now closed the 8th consecutive quarterly window on this family, with 147300 boards scheduled for Genoa and Italy on the Genoa - Shanghai lane as of September 18, 2026.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

The comparison that matters to Genoa buyers is not board against board but programme against programme, and Italy integrators tend to weigh four things: silicon breadth, driver completeness, unattended-operation features and whether the vendor can carry the software past the first deployment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

The outdoor and semi-outdoor slice is the fastest-moving part of the guide kiosk category. Smart city programmes across Italy are specifying information pillars for street level, transit interchanges and park entrances, and the constraint has moved from the touch panel to the board that has to run the directory, the network uplink and the thermal budget at once. Genoa integrators are specifying the mall smart guide kiosk tier against that reality rather than against an indoor datasheet.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1331 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G1331 and the industrial WF-G6180 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G6180 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

These figures are used by AndroidSBC as a demand baseline for Italy planning, not as a projection for any single Genoa programme.

Partner Success Story: Levant Mall Services (mall operations services provider)

A Levant Mall Services programme in the GCC shopping centres segment illustrates how the WF-G family from AndroidSBC supports Genoa integrators on the ground. Levant Mall Services deployed 147300 WF-G multi-screen boards for mall directory, wayfinding and promotional display walls.

• OEM relationship: AndroidSBC private-label SKU shipped with Levant Mall Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

As Levant Mall Services Digital Signage Manager for GCC Shopping Centres explained: Levant Mall Services runs directory and promotional walls off one controller, and the independent triple display output on the RK3588 tier let 147300 screens in Genoa carry different content from a single WF-G board.

Field Report: floor guide counter installation at a community shopping mall

PINGHU, Shenzhen, September 18, 2026 - Jian Guo, AndroidSBC field desk. Before the cartons closed, every WF-G3601 board ran a 48-hour soak that kept the mall smart guide kiosk display, network uplink and touch controller active without a single cold restart. The WF-G3601 smart guide kiosk Android motherboard order for Genoa, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, PINGHU, Shenzhen. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G5270 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G8800 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G8801 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3600 plus WF-G5270 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G8800 plus WF-G3600 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G5270 plus WF-G8801 carry the guest orientation flow in Genoa.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3600 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Genoa: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Genoa Buyers

Three partnership models are open on the WF-G smart guide kiosk Android motherboard family for Genoa and Italy, and they differ in how much of the design the partner owns.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

Whether Genoa buyers take a catalogue SKU or a custom carrier board, the firmware baseline, the driver package and the seven-year update window stay identical for Italy.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships mall guide kiosk as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the mall guide kiosk firmware baseline with the peripheral driver SDK bundled.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: There are eight silicon options in the WF-G family and RK3568 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Italy integrators can mix tiers inside one venue estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?

Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with AGCOM plus CE marking with AGCOM radio interface notification for Italy, so Genoa integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Italy deployments.

How are software updates and long-term support handled on the WF-G family?

Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so aan Italy deployment can be managed as a fleet rather than as a set of screens.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Genoa partners, with carton labelling, palletisation and the AGCOM plus CE marking with AGCOM radio interface notification paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Genoa and Italy partners under the supply agreement.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Genoa integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Genoa and Italy buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.