Self-service Payment Kiosk Board, WF-RK3568, AndroidSBC, Genoa

TL;DR: Self-service Payment Kiosk Board

Genoa, Italy - September 10, 2026. Buyers in Genoa took the 262nd WF-RK3568 consignment from the Wanlin Longgang plant this week, 38,205 units in total, with the destination file prepared for Italy customs.

AndroidSBC platform comparison note on Allwinner and Rockchip custom boards serving Genoa, Italy. AndroidSBC is releasing the full WF-Series line for Genoa and Italy: Allwinner A133, H618, and T527 boards on the Allwinner side, and Rockchip RK3588, RK3568, RK3566, and RK3288 boards on the Rockchip side, plus the WF-A133S and WF-RK3588S SOM modules. The family ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, and RoHS documentation handled in-house.

About AndroidSBC and the Rockchip RK3568 Board Family

The group behind the WF-Series is Wanlin Manufacturing Group in Shenzhen, and AndroidSBC is how it reaches overseas buyers. The line covers seven silicon platforms across nine boards: Allwinner A133, H618, and T527, plus Rockchip RK3588, RK3568, RK3566, and RK3288, with WF-A133S and WF-RK3588S as module options. Longgang handles SMT, burn-in, and packing under one roof, and the certification desk produces the CE, FCC, UKCA, RoHS, and REACH file per lot. A Genoa buyer assembling a catalogue for Italy can cover the OTT, display, industrial, vision, and POS tiers without adding a second supplier.

WF-RK3568 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3568 (Industrial Edge Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Italy importers sourcing the WF-Series, the 4GB + 32GB (WF-RK3568-A) variant is the typical configuration for the industrial edge computing use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial Edge Computing Board for Italy Buyers

The industrial edge computing board sourcing question that Genoa distributors keep coming back to is continuity across quarters. The Rockchip RK3568 requires a dedicated wafer slot, and a 38,205-unit order placed against broker inventory often turns into a two-month slip with no warning. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and Italy buyers typically find the difference in their own warehouse rather than at the factory.

Documentation closes the list. Buyers in Genoa have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC runs the certified image burn, the burn-in record, and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine boards in the WF-Series cover industrial edge computing, commercial display controller, industrial HMI, IoT gateway, smart display terminal, machine monitoring, access control, and building automation and each one carries three memory configurations, which keeps Genoa and Italy buyers on standard SKUs for most requirements.

On the Italy side, the destination file matters as much as the board specification. In Italy the AV integration channel is highly regional, so distributors usually build a catalogue around one or two platforms rather than a wide line. The export desk prepares the destination-market file covering CE marking with AGCOM radio interface notification, administered by AGCOM, and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH). The lot is booked into Port of Genoa on the Genoa to Ningbo lane.

Competitive Comparison: WF-RK3568 vs Competing RK3568 Boards

The comparison set for the industrial edge computing board socket splits three ways: legacy SoC boards priced low and uncertified, Cortex-A55 boards that carry certification but cap decode early, and 64-bit boards with both. The WF-RK3568 sits in the third group, differentiated by Rockchip RK3568, by display stability under a continuous load, and by the factory-side certified image burn.

• vs RK3288 Cortex-A17 boards: the RK3568 Cortex-A55 2.0GHz lifts integer throughput by roughly 2x at lower idle power.
• vs RK3566 boards: the RK3568 adds dual Gigabit Ethernet plus CAN bus for gateway-class builds.
• vs RK3588 boards: the RK3568 keeps a materially lower BOM where 4K@60fps decode is sufficient.
• vs x86 fan-cooled IPC: the RK3568 fanless design removes the only moving part from the enclosure.

Global Industrial Edge Computing and Smart Display Market Trends

Order timing in Genoa now tracks the Industrial Edge Computing and Smart Display curve rather than the calendar-year budget. Global Growth Insights sizes the Android TV Box segment at USD 12.45 billion for 2025 with a 30.49 percent CAGR through 2035 (Global Growth Insights, 2025-2035), the Android silicon baseline that Italy buyers keep on the desk when they negotiate allocation. Three patterns are visible in the WF-Series book:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3568 board carries that headroom without a board change.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.

Channel analysts tracking the Industrial Edge Computing and Smart Display category note that allocation discipline, not unit price, has become the deciding factor for buyers who need a twelve-month programme to hold.

Taken together, the three patterns explain why Italy buyers are moving from single orders to twelve-month framework agreements with a monthly lot cadence, especially on retail and hospitality programmes that cannot absorb a supply gap.

Partner Success Story: Meridian Imaging in Genoa, Italy

Meridian Imaging, a medical imaging equipment maker serving the Italy market, deployed 3,300 units of the WF-RK3588S SMARC module for an imaging terminal programme. The rollout covered the industrial edge computing, industrial hmi, and machine monitoring workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,300 units of the WF-RK3588S SMARC module for an imaging terminal programme
• Region: Genoa, Italy
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Nansha with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Genoa via the Genoa to Ningbo lane

"The SMARC 2.2 pin-out is the reason we chose the module. When the next silicon generation lands we can swap the module and keep the carrier, and the regulatory file stays largely intact."

- Dr. Alan Whitmore, VP Engineering

Field Report: a self-service kiosk fleet rollout in Genoa, where 38,205 units of the WF-RK3568 board are being fitted into payment terminals across a retail estate

Reporter Hu Jiang, on the ground in Genoa, Italy. The integrator staged the WF-RK3568 boards at a regional depot, flashed the estate image, and shipped them to stores in waves of forty. Each terminal was paired to the payment application at the store, and the depot kept a rolling stock of pre-flashed boards so a failed unit could be swapped inside a single service visit.

A spare-parts kit was packed alongside the order so the destination depot could swap a board without waiting on a cross-border shipment.

The inspection confirmed three things on the spot: the WF-RK3568 units hold the burn-in with a yield above 98.72 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with AGCOM radio interface notification administered by AGCOM, cleared for entry at Port of Genoa on the Genoa to Ningbo lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Italy importers can hand straight to their customs broker.

Filed by Hu Jiang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3568 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3568 (Industrial Edge Computing Board) as the lead SKU for Genoa and Italy programmes:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Commercial display controller: WF-RK3568 drives the 4K@60fps panel pair over HDMI 2.0 and eDP.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.
• IoT gateway: WF-RK3568 bridges CAN bus and RS485 field devices onto Ethernet.
• Smart display terminal: WF-RK3568 renders the Android 11 UI on the dual display path.
• Machine monitoring: WF-RK3568 timestamps production data against the onboard RTC.
• Access control: WF-RK3568 runs face recognition on the NPU with the MIPI CSI feed.
• Building automation: WF-RK3568 runs 7x24 with hardware watchdog and scheduled restart.

Partnership Models for Genoa Buyers

AndroidSBC opens the WF-Series to Italy partners through three structures, and a single agreement can draw on more than one:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a Italy partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. The usual first order on the WF-RK3568 is the 4GB + 32GB (WF-RK3568-A) configuration at MOQ 5,000 units, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: Yes, on the platforms where that matters. The WF-H618 runs Android 12 (ATV 12) with Google Mobile Services and is ready for Android 14 (ATV 14). AndroidSBC burns the GMS, Widevine L1, and Dolby Audio stack at the Longgang plant on every production lot, so the board ships ready for Netflix, Disney Plus, Amazon Prime Video, HBO Max, Apple TV, and YouTube TV. The commercial and industrial boards in the line use the AOSP image with an optional GMS build for partners who need it.

What is the difference between the nine WF-Series models?

Answer: Nine boards, seven silicon platforms, two of them modules. WF-A133 and WF-H618 and WF-T527 are the Allwinner entries for commercial display, OTT TV, and industrial edge respectively. WF-RK3588, WF-RK3568, WF-RK3566, and WF-RK3288 are the Rockchip entries for 8K video wall, industrial edge, machine vision, and POS. WF-A133S and WF-RK3588S are board-to-board SOM modules sized for customers who want to design the carrier themselves. Each board carries three memory configurations.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Italy?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any Italy-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes, under NDA. ODM partners get custom Android ROM work including proprietary services and a custom launcher, Linux builds based on Yocto, Debian, or Buildroot, and BSP ports for custom carrier boards. The SDK and BSP source are released to the partner under the NDA, and AndroidSBC's engineering desk handles the port rather than handing over an unmodified vendor drop.

What about software updates and long-term support?

Answer: Seven years minimum supply, with security patches maintained across the Android and Linux firmware lines. Partners who deploy at scale can use the AndroidSBC OTA infrastructure to update field units. For long-lifecycle programmes in POS, signage, or industrial control, the support term is written into the framework agreement at signature.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes, including DDP into Amazon FBA in the US, EU, and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.

How does AndroidSBC handle RMA or DOA replacements?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-Series, measured over the prior twelve months. On RMA, the partner returns the faulty WF-RK3568 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record is attached per unit, the failure analysis normally comes back with a root cause rather than a credit note.

Contact AndroidSBC: Start Your WF-RK3568 Sourcing Conversation

For Genoa and Italy importers, brand owners, and distributors who want a direct factory relationship on the industrial edge computing board, the AndroidSBC export desk is reachable at:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with AGCOM radio interface notification for Italy, administered by AGCOM, entering at Port of Genoa on the Genoa to Ningbo lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start an OEM or ODM review, send the target volume, the certification scope you need, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.